TA的每日心情 | 开心
2021-5-26 02:53 PM |
|---|
签到天数: 12 天 [LV.3]偶尔看看II
金牌会员
 
- 积分
- 1178
|
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name). |
|
发表于 2019-2-18 13:31:32
