RationalDMIS手动采集元素数模自动提示触测点位置（适用于3.0以上所有版本）

Jianhongwei810

DMISMN/'Created by [深圳市银宝山新科技股份有限公司(东莞压铸厂)-070119] on 星期二, 十二月 11, 2018', 4.0UNITS/MM, ANGDEC, MMPSWKPLAN/XYPLANPRCOMP/ONTECOMP/ONFLY/1.0000MODE/PROG, MANSNSET/APPRCH, 3.0000SNSET/RETRCT, 3.0000SNSET/DEPTH, 0.0000SNSET/SEARCH, 10.0000SNSET/CLRSRF, 30.0000RECALL/D(MCS)SNSLCT/S(L20-20-D2.0)GEOALG/BF, LSTSQRGEOALG/ANGLB, DEFALTGEOALG/CIRCLE, LSTSQRGEOALG/ARC, LSTSQRGEOALG/PLANE, LSTSQR$$$$MODE/MAN$$ Set.CAD2PCS.CADM_1$$ Set.CADViewCenter.CADM_1$$ Set.TargetZoom.ONF(PLN1)=FEAT/PLANE,CART,50.3702,43.7399,35.0000,0.0000,0.0000,1.0000$$ Measurement points are created through actual pointsMEAS/PLANE, F(PLN1), 4  PTMEAS/CART,   7.0805, 75.5453, 35.0000, 0.0000, 0.0000, 1.0000  PTMEAS/CART,   5.7358, 29.0749, 35.0000, 0.0000, 0.0000, 1.0000  PTMEAS/CART,  73.9151, 17.9876, 35.0000, 0.0000, 0.0000, 1.0000  PTMEAS/CART, 114.7493, 52.3519, 35.0000, 0.0000, 0.0000, 1.0000ENDMESD(CRD1) = DATSET/FA(PLN1), ZDIRF(LN1)=FEAT/LINE,BND,CART,3.4465,0.0000,16.2020,64.4698,0.0000,16.8104,0.0000,-1.0000,0.0000$$ Measurement points are created through actual pointsMEAS/LINE, F(LN1), 2  PTMEAS/CART,  3.4465, 0.0000, 16.2020, 0.0000, -1.0000, 0.0000  PTMEAS/CART, 64.4698, 0.0000, 16.8104, 0.0000, -1.0000, 0.0000ENDMESF(PT1)=FEAT/POINT,CART,0.0000,15.5956,28.7035,-1.0000,0.0000,0.0000MEAS/POINT, F(PT1), 1  PTMEAS/CART, 0.0000,15.5956,28.7035,-1.0000,0.0000,0.0000ENDMESD(CRD2) = DATSET/FA(PLN1), ZDIR, ZORIG, FA(LN1), XDIR, YORIG, FA(PT1), XORIGD(CRD2) = TRANS/ZORIG, -35, YORIG, -0, XORIG, -0$$ Set.CAD2PCS.CADM_1$$ Set.CADViewCenter.CADM_1$$ Set.TargetZoom.OFF