设为首页收藏本站

蔡司(zeiss)三坐标测量技术专业论坛-国内最专业的三坐标论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 11153|回复: 197
打印 上一主题 下一主题

坐标系建立

[复制链接]
  • TA的每日心情
    开心
    2020-2-11 04:29 PM
  • 签到天数: 73 天

    [LV.6]常住居民II

    6

    主题

    78

    帖子

    337

    积分

    中级会员

    Rank: 3Rank: 3

    积分
    337
    跳转到指定楼层
    楼主
    发表于 2015-5-29 09:39:48 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
    希望有高手做个案例讲解关于基本坐标系,初定位坐标系,附加坐标系之间的关系与应用,详细讲讲。最好用实例工件演练下做个小视频或是PDF操作流程图也行!
    分享到:  QQ好友和群QQ好友和群
    收藏收藏
    回复

    使用道具 举报

  • TA的每日心情
    开心
    2023-2-7 02:28 PM
  • 签到天数: 19 天

    [LV.4]偶尔看看III

    4

    主题

    1182

    帖子

    1695

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1695
    198#
    发表于 2022-11-12 15:47:31 | 只看该作者
    谁有这个闭工夫搞这些
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    197#
    发表于 2019-2-18 13:34:25 | 只看该作者
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    196#
    发表于 2019-2-18 13:34:23 | 只看该作者
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    195#
    发表于 2019-2-18 13:34:20 | 只看该作者
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    194#
    发表于 2019-2-18 13:34:18 | 只看该作者
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    193#
    发表于 2019-2-18 13:34:16 | 只看该作者
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    192#
    发表于 2019-2-18 13:34:14 | 只看该作者
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    191#
    发表于 2019-2-18 13:34:12 | 只看该作者
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    190#
    发表于 2019-2-18 13:34:00 | 只看该作者
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

     
     
    论坛问题支持
    蔡司技术支持
    蔡司论坛群:
    蔡司三坐标交流论坛
    工作时间:
    8:30-17:30
    夜间时间:
    19:30-24:00

    站长微信扫一扫

    小黑屋|手机版|Archiver| ( 苏ICP备17071574号-14 )

    GMT+8, 2024-11-23 07:25 AM , Processed in 0.097685 second(s), 24 queries .

    Powered by Discuz! X3.4

    © 2011-2021 苏州邦恩精密仪器有限公司

    快速回复 返回顶部 返回列表