标题: 坐标系建立 [打印本页] 作者: rolayhorse 时间: 2015-5-29 09:39 AM 标题: 坐标系建立 希望有高手做个案例讲解关于基本坐标系，初定位坐标系，附加坐标系之间的关系与应用，详细讲讲。最好用实例工件演练下做个小视频或是PDF操作流程图也行！作者: GU1900007 时间: 2015-5-31 07:56 PM
顶作者: 393780085 时间: 2015-6-2 08:39 AM
期待啊 作者: timzsq 时间: 2015-6-2 04:53 PM
期待啊，但是没有看到高手回复作者: 393780085 时间: 2015-6-10 08:06 PM
怎么都没有人回复啊 作者: 指尖的烟味 时间: 2015-12-5 08:48 PM
初定位仅为告诉设备工件的位置，作者: 指尖的烟味 时间: 2015-12-5 08:48 PM
初定位仅为告诉设备工件的位置，作者: wangling 时间: 2016-4-16 10:38 PM
谢谢楼主，论坛有你更精彩作者: 13345171833 时间: 2019-2-14 12:52 AM
为了买资料学习暖暖的灌水作者: 13345171833 时间: 2019-2-18 01:00 PM
大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:00 PM
大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:00 PM
大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:00 PM
大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:00 PM
大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:01 PM
大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:01 PM
大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:01 PM
大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:01 PM
大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料大量的金币 大量的资料作者: 13345171833 时间: 2019-2-18 01:09 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:09 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:09 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:10 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:23 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:24 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).作者: 13345171833 时间: 2019-2-18 01:30 PM
CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).CALYPSO Tip: Add your company logo to reports.
By Phil Adair, Applications Engineer
Personalize your CALYPSO measurement reports by
exchanging the ZEISS logo on the default report with your
own company's image. Use the following procedure to
replace the logo.
Carl Zeiss Default Report
1. Create your logo.
Using an image editing software, create a bitmap (.BMP) of
your logo. The ZEISS logo on the default report is 60 x 60
pixels. While the logo can be any size, we recommend a
maximum of 100 x 100 pixels. Save the logo file to your
hard drive.
2. Make a copy of the report template folder.
The folder that contains the default report template is
located in zeiss\calypso\opt\om\protform. Using
Windows Explorer, go to the above location and make a
copy the default folder and rename it to anything you
want, such as company_report (do not use spaces in the
file name).
